耐油橡膠制品原料 勝浩橡塑
單價： 38.50元/KG
最小起訂量：25 KG
供貨總量：500000 KG
更新日期：2022-03-31 10:56
注塑級NBR，本色和黑色兩種，硬度值有50A、60A、70A、80A、90A、95A。耐油制品墊圈、膠墊
| NBR橡膠顆粒——注塑級物性參數 | |||||
| 性能 | 測試條件 | 典形數據 | 單位 | 測試方法 | 備注 |
| Properties | Test Condition | Typical value | Unit | Test Method | |
| 熔融流動速度 | 190℃/2.16Kg | 3.2 | g/10min | ASTM D1238 | |
| Melt Flow Rate | |||||
| 比重 | 25℃ | 0.96 | NA | ASTM D792 | |
| Specific Gravity | |||||
| 邵氏硬度 A | 25℃/5 Sec. | 54 | A | ASTM D2240 | |
| Shore Hardness A | |||||
| 拉伸強度 | 25℃/500 mm/min | 3.71 | Mpa | ASTM D412 | |
| Tensile Strength | |||||
| 延伸率 | 25℃/500 mm/min | 393 | % | ASTM D412 | |
| Ultimate Elongation | |||||
| 拉伸應力 | 25℃/500 mm/min | 2.93 | Mpa | ASTM D412 | |
| Tensile Stress @ | |||||
| 撕裂強度 | 25℃/500 mm/min | 10.09 | N/mm | ASTM D624 | |
| Tear Strength | |||||
| 壓縮變形 | 70℃/22Hrs | 41 | % | ASTM D395 B | |
| Compression Set | |||||
| 干燥條件/Drying Condition | |||||
| 80℃ -100℃ /2-4小時Hrs | |||||
| 工藝參數/Processing Conditions | |||||
| 機筒溫度 | 料筒前段 | 料筒中段 | 料筒后段 | 料筒噴嘴 | |
| Barrel temperature | Front section | Middle section | Rear section | Nozzle | |
| 溫度 | 180℃-190℃ | 190℃-210℃ | 190℃-210℃ | 180℃-190℃ | |
| Temperature | |||||
| *以上數據和資料僅作參考之用。所有數據是由我方實驗所得的真實數據并相信其準確性.不過,以上數據和資料不能保證可引伸至使用者,使用者應自行測試加以確認。 | |||||
|
*The data & information here are for reference only. All data were generated in our laboratory and are true and trustable. However, these would not be guaranteed as sales specifications and the user should evaluate the suitability to their final applications.
溫馨提示您: 因塑膠原料行情每天每時波動較大無法及時更新，導致頁面上報價可能會與當天實際報價有所差異，請親們理解及時來電咨詢！ 電話：葉庚勝經理 0769-33327260或13620043019 公司：東莞市勝浩塑膠原料有限公司 地址：東莞市樟木頭鎮先威大道塑膠商務中心7棟56號
|
|||||
